Back
Back
MC20III
By integrating three single-axis lathes into a single machine unit, it realizes ultra-high productivity that exceeds the limits of productivity achievable by conventional automatic lathes
MC20III
By combining three machining modules in a multi-station configuration, the MC20 will support a variety of machining layouts to enable ultra-high productivity levels. Machining processes can also be optimised through the Cincom dynamic control software that supports highly flexible operations thus making 'Ko No Ryosan' (mass customization) a reality.
Expanded clearance between two modules helps improve working efficiency during tooling.
- Production line relocation is accomplished by moving a single machine unit, and production line setup changes are achieved by changing the setup on a single machine
- By combining various types of modules not restricted those for turning operations, it evolves further with versatile functionality
Technical data MC20III
| Machine Specifications | |
| Number of mounted modules: | 3 |
| Chuck size: | 4-inch chuck |
| Maximum diameter for Workpiece through hole: | 20 mm |
| Workpiece maximum length: | 70 mm |
| Maximum drilling diameter for main spindle: | 7 mm |
| Maximum tapping diameter for main spindle (Cutting tap): | M6 |
| Spindle speed: | Max 8,000 min-1 |
| Gang tool rotary tool maximum drilling diameter: | 5 mm |
| Gang tool rotary tool maximum tapping diameter (Cutting tap): | M5 |
| Number of tools to be mounted in standard machining specification: | 5 per 1 module |
| Number of tools to be mounted in standard machining specification (turning tool): | 2 |
| Number of tools to be mounted in standard machining specification (Cross drilling): | 3 |
| Cutting, cross, and end surface machining specifications: | 6 per 1 module |
| Cutting, cross, and end surface machining specifications (Cutting tool): | 2 |
| Cutting, cross, and end surface machining specifications (Cross drilling): | 2 |
| Cutting, cross, and end surface machining specifications (End surface drilling tool): | 2 |
| Maximum machining specification: | 9 per 1 module |
| Maximum machining specification (Cutting tool): | 4 |
| Maximum machining specification (Cross drilling): | 1 |
| Maximum machining specification (End surface drilling tool): | 4 |
| Tool size (byte): | 13 mm |
| Tool size (sleeve): | 19.05 mm, 20 mm |
| Rapid feed rate (X, Y, and Z axis): | 32 m/min |
| Rapid feed rate (A axis): | 40 m/min |
| Motors (For spindle drive): | 2.2/3.7 kW |
| Motors (For tool spindle drive(gang tool post)): | 0.75 kW |
| Motors (For cutting coolant oil): | 0.18 kW ×3 |
| Input power capacity: | 16 kVA |
| Center height: | 1,000 mm |
| Machine Weight: | 3,600 kg |
